ALITOVE 16.4ft 5050 SMD Red LED Waterproof Strip Light IP65 12V for Patio Deck Backyard and Camping Ambiance Without Power Supply
ALITOVE 16.4ft 5050 SMD Red LED Waterproof Strip Light IP65 12V for Patio Deck Backyard and Camping Ambiance Without Power Supply
Couldn't load pickup availability
Why you'll love it
- Upgraded VHB heavy duty foam tape prevents the strip from falling off, addressing a common pain point of cheaper LED strips
- IP65 silicone waterproofing allows confident use in outdoor and damp environments like decks and boats
- Cuttable every 3 LEDs lets buyers tailor the strip length precisely to their project without waste
- Dual power input ends (2pin wire and 5.5x2.1mm DC connector) make it compatible with a wide range of 12V power supplies
- Low 12V DC input is safe to touch and suitable for households with children
- High 60 LEDs/m density delivers more even and natural red illumination without dark spots
Perfect for
- Red accent lighting for holiday and party decoration setups
- DIY cut-to-length under-cabinet or stair accent lighting projects
- Outdoor ambient lighting for backyards, decks, and gardens
- Custom red lighting for vehicle interiors, RVs, and boats
- Commercial area decorative or themed lighting
Parameter:
- Light source: SMD 5050 Red LED
- LED quantity: 60 LEDs/m, 5m 300 LEDs in total
- Protection Rate: IP65 Waterproof (Can’t be used underwater)
- Max Power: 12V DC, 5A, 60W
- Working temperature: -20℃ to 40℃
- Size: L500cm (5M) x W1.0cm x T0.25cm
- Package List: 1x 16.4ft ALITOVE Red LED strip (No power supply and dimmer, only LED strip)
Kindly Note:
- Only the LED strip in the package, power supply is not included. To let it work, you need to buy a ALITOVE 12V 5A 60W power supply.
- If the strip blinks or flashes, it means the power is not enough for the strip. The power for 5m led strip must be 12V 5A 60W at least.
- The LED strip is flexible, but please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack.
Product Information
【VHB Foam Back Tape】 Based on buyers’ feedback on adhesive issue, we upgraded the tape to VHB heavy duty foam mounting tape. It is much more sticky and durable than blue or white tapes which is widely used by other brands. Never fall off. ( Heating the tape with heat gun or hair dryer will make it more sticky.) 【Super Quality LED Strip】 300 pcs high-brightness 5050 Red LEDs are evenly embedded on the 5m(16.4ft) double-layer pure copper FPCB Board and give out beautiful red light. High-density 60 LEDs/M design makes luminescence more even and natural. Low voltage 12V DC input, safe to use, touchable to children. 【Flexible Design & Cut freely】 Using flexible copper circuit board, you can gently bend it to an arc. Please NEVER rudely bend it to right or acute angle, otherwise the circuit board and silicone coating will crack. The strip lights can be cut between every 3 LEDs along along the cutting marks to fit for your project, great for DIY. 【Two different power input ends】One end has 2pin wire, you can screw it to the positive and negative terminals of 12V power supply. The other end has 5.5x2.1mm female DC connector. If your 12V power supply has 5.5x2.1mm male DC connector, just plug and work. The power supply is not included. 【Indoor and Outdoor Use】The LED strip is coated with clear silicone, up to IP65 waterproof rate. It can be used to beautify both indoor and outdoor lighting scenes, such as backyard, deck, boat, living room, bedroom, kitchen, ceiling, stairs etc. 24 months free warranty. We always stand behind our products. 𝐈𝐦𝐩𝐨𝐫𝐭𝐚𝐧𝐭: Please note that if used with vehicles such as cars, RVs, trucks, etc., please ensure that the power supply provides a stable voltage; if used for a long time at more than 12V, the circuit board will be damaged, resulting in abnormal conditions. 𝐖𝐡𝐚𝐭 𝐤𝐢𝐧𝐝 𝐨𝐟 𝐩𝐨𝐰𝐞𝐫 𝐬𝐮𝐩𝐩𝐥𝐲 𝐬𝐡𝐨𝐮𝐥𝐝 𝐲𝐨𝐮 𝐜𝐡𝐨𝐨𝐬𝐞: It is recommended to use our 12V 5A 60W power supply(ASIN: B01GEA8PQA). Many power supply labels on the market are false and the power is not as high as claimed. If the power supply is overloaded, the DC connector will become hot.
Features & Specs Indoor Outdoor Usage Outdoor Additional Features Dimmable Light Source Type LED Power Source DC 12V Light Color Red Controller Type NO Connectivity Protocol Wired Connection Connectivity Technology Corded Connection Voltage 12 Volts Wattage 60.00 Control Method App Water Resistance Level Waterproof Wireless Communication Technology NO Style Color Red Theme Decoration , Lighting , Party , Holiday Occasion Party , Holiday , Show Product Style Modern Measurements Number of Light Sources 300 Item Weight 210 Grams Number of Items 1 Item Dimensions 196 x 1 x 8 inches
Frequently Asked Questions
Can I leave this red LED strip outside overnight in the rain without damaging it?
Yes. The strip is coated with IP65 clear silicone, which protects against rain, splashes, and damp air. You can leave it on a deck, patio, or pergola overnight, but the DC connector and power supply should be kept dry or housed in a weatherproof enclosure.
How bright is the red glow on a backyard deck at night?
With 60 high-brightness 5050 SMD LEDs per meter, the strip delivers a strong, even red wash across the surface it is mounted on. On a standard deck railing or pergola beam, it provides a clear ambient glow visible from 10 to 15 feet away without looking spotty.
Will the VHB foam tape actually hold the strip on a rough outdoor surface like wood or concrete?
The upgraded VHB heavy duty foam tape bonds aggressively once heat-activated by pressing firmly during installation. For rough concrete or textured wood, we recommend cleaning the surface with isopropyl alcohol first and applying the strip in temperatures above 50°F for the strongest hold.
Can I cut the strip to fit around a curved garden path or odd-shaped patio section?
Yes. The strip has marked cutting lines every 3 LEDs, so you can trim it to any length you need for curved paths, short rail segments, or step accents. Just cut only on the marked lines to keep the remaining section working.
What kind of 12V power source do I need to run this outdoors away from an outlet?
For outdoor locations far from an outlet, you can pair the strip with any 12V DC power supply rated for at least 2A, or run it from a 12V battery such as a portable camping power station, RV house battery, or marine battery.
Is this red LED strip a good pick for setting up a casual outdoor dinner vibe?
Absolutely. The deep red glow is perfect for dinner parties, date nights on the patio, or evening get-togethers. It casts a warm, intimate wash over tables and seating without the fire risk of candles or tiki torches.
Will the silicone coating yellow or crack after a summer of full sun exposure?
The IP65 silicone coating is UV-stable and designed to resist yellowing and cracking under typical outdoor conditions. For installations in direct midday sun year-round, mounting the strip on a shaded underside will extend the cosmetic life even further.
Can I power this strip from my car battery for tailgating or camping trips?
Yes. A 12V car battery, portable jump-starter pack, or 12V camping power station will run this strip directly. The strip's dual power input ends include a 5.5x2.1mm DC connector that fits most standard 12V adapters and battery packs.
Does the red LED strip work with a dimmer for softer outdoor mood lighting?
Yes, as long as you pair it with a 12V DC-compatible PWM dimmer placed between the power supply and the strip. This lets you soften the red glow for relaxed evenings or raise it for a livelier gathering.
How does this strip hold up versus cheaper LED strips sold for outdoor patios?
Unlike generic strips that use thin FPCB boards and weak adhesive, this strip uses a double-layer pure copper board for stable current and upgraded VHB tape that resists peeling in heat and humidity. The IP65 silicone also gives it real outdoor durability, not just splash resistance.
Can I link multiple strips together to wrap an entire backyard pergola?
Yes, you can connect multiple strips in parallel to a single 12V power supply rated for the combined current draw. For long runs over 16.4ft, we recommend running separate power feeds from the supply to each strip to avoid voltage drop and dimming at the far end.
I'm worried the strip will fall off my deck railing after a few weeks. How can I prevent that?
Clean the mounting surface with isopropyl alcohol, let it dry fully, then press the strip firmly along its entire length during install. The VHB tape reaches full bond strength after about 24 hours, so avoid pulling on it during the first day.
Will cold winter temperatures cause the silicone coating to crack or the LEDs to fail?
The strip operates in a wide temperature range typical for silicone-coated LED strips. The flexible silicone stays pliable in cold weather, and the 5050 SMD LEDs are rated for low-temperature operation. For below-freezing long-term outdoor storage, simply unroll the strip before powering it on.
Is this strip visible enough to use as a safety marker along outdoor stairs at night?
Yes, the 60 LEDs/m density creates a continuous line of red light that clearly outlines step edges in the dark. Many buyers use it on deck stairs, garden steps, and porch risers to add both ambiance and a visual guide for guests.
How do I install this red LED strip on a wall or under a cabinet?
Clean the mounting surface with isopropyl alcohol and let it dry. Peel the backing off the VHB tape, press the strip firmly along the entire length, and hold for 30 seconds. Wait 24 hours for the tape to reach full bond strength before applying any stress to the strip.
Where exactly can I cut the strip without damaging it?
Cut only on the clearly marked copper pads every 3 LEDs. Cutting anywhere else will break the circuit and the remaining section will not light up. Scissors or a sharp blade work well for a clean cut.
Do I need a special controller or remote to use this strip?
No controller is required. The strip lights up as soon as it is connected to a 12V DC power source. If you want dimming, you can add a 12V DC-compatible PWM dimmer or controller between the power supply and the strip.
Will this strip work with my existing 12V power supply?
Yes, as long as your power supply is 12V DC and rated for at least 2A, it will work. The strip includes both 2pin wire leads and a 5.5x2.1mm female DC connector, so it plugs into most standard 12V adapters and battery packs.
Is this strip compatible with a standard LED dimmer from a hardware store?
It is compatible with any 12V DC PWM dimmer or controller. Standard 120V AC wall dimmers will not work because the strip operates on low-voltage DC. Make sure the dimmer matches the 12V DC specification of the strip.
What is included in the box, and what do I need to buy separately?
The box includes one 16.4ft / 5m red LED strip reel with VHB tape backing and dual power input ends. A 12V DC power supply is not included and must be purchased separately. You will also need a 12V DC PWM dimmer if you want dimming control.
Is this strip safe to use around water, like in a bathroom or on a boat?
Yes, the IP65 silicone coating protects against splashes, steam, and rain. The strip can be used in bathrooms, on boat decks, and outdoors. The DC connector and power supply should be kept dry or enclosed in a weatherproof housing for safety.
How long will this LED strip last before the LEDs start to dim or fail?
The 5050 SMD LEDs are rated for tens of thousands of hours of use, which translates to many years of typical daily operation. The double-layer copper FPCB board and silicone coating also help protect the strip from heat and moisture damage over time.
What is the difference between an LED strip and LED rope light?
An LED strip is a flat, flexible circuit board with surface-mounted LEDs, while LED rope light is a thicker, cylindrical tube with LEDs inside. Strips are easier to cut, mount flush against surfaces, and hide in architectural details. Rope light is bulkier and more visible.
