Anwenk Adjustable Leveling Feet Furniture Levelers for Living Room Sofas and Dining Tables, Heavy Duty Wobble Fix with Sleek Black Base
Anwenk Adjustable Leveling Feet Furniture Levelers for Living Room Sofas and Dining Tables, Heavy Duty Wobble Fix with Sleek Black Base
Couldn't load pickup availability
Why you'll love it
- Commercial-grade 1320 lb total load capacity handles heavy sofas, dining tables, and equipment
- Universal nylon base plus included felt pads means one product works on hardwood, tile, and carpet without buying extras
- Wide 3/4" to 1 3/4" height adjustment solves both slight wobble and significant floor unevenness
- Complete kit with T-nuts and screws means no extra hardware store trips
- Simple screw-in installation for pre-threaded legs or basic pre-drilling for solid wood, accessible to non-professionals
- Stops furniture from sliding on smooth floors and prevents floor scratches
- TIG welding compatibility for a clean flush appearance on custom steel legs
- Screw holes are chamfered to accept flat head screws
- Worked perfectly for spreading/leveling an antique oak desk refinished as a bathroom vanity
- Easy to install on a planer/jointer stand built with 2x4 framing
- Padded feet work well for sliding on wood floors without scratching
- Good hefty, sturdy quality rather than cheap thin steel
- Works better than bolt-on stove levelers because they take up less room under blackstone-type griddles
Perfect for
- Stabilizing wobbly chairs, tables, and sofas on uneven flooring
- Leveling cabinets and bookshelves flush against walls to prevent gaps
- Raising furniture 3/4" to 1 3/4" to clear rugs, vents, or robot vacuums
- Protecting hardwood and tile floors from scratches and chair-drag noise
- Refurbishing secondhand furniture with damaged or missing original feet
- Leveling a 9ft slate pool table on unlevel concrete in a man cave
- Adjusting a workbench on a garage floor with significant unevenness
- Welding the mounting socket to steel tube stock legs for an epoxy table
- Leveling a floor-to-ceiling cat tower by applying back pressure between floor and ceiling
- Building a homemade gun cleaning/sighting stand from scrap wood
- Leveling an outdoor bar on a deck
Featuring-
- Easy to install and adjustable height as your require;
- Suitable for using them in residential or working area;
- Work out perfectly as replacement in your table, office table, sofa, couch, ottoman bench, chair, bed and more!
- Separated felt pads allows your furniture to glide smoothly and quietly.Prevent scratches, scrapes or harsh grating.
NOTE: Leveling feet allows you to adjust the furniture feet height from 3/4” to 1 3/4” for maximum support and adjustability.
More Features...
Support max 1320LBs, universal nylon bottom for all type of floors, perfect choice for heavy furniture.
Steel thread insert and t-nuts, commercial quality standard with long service life.
All black including T-nuts and screws. Our leg levelers can fix your furniture quickly while not compromising the look!
Work on Indoor&outdoor.
Work on heavy furniture.
Leveling feet for ALL wood leg feet.
Height Adjustable for your table desk.
Product Information
✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease ! ✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread; Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability. ✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs! ✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises. ✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included.
Brand Anwenk Color 4pack Leveling Feet Size 1.3 inches x 1.5 inches x 1.3 inches Style Modern 3/8"-16 thread furniture leveling feet Item Weight 0.5 Pounds Product Care Instructions Wipe with Dry Cloth Leg Style round Furniture Finish Black Number of Pieces 24 Weight Limit 1320 Pounds Manufacturer Anwenk Product Dimensions 1 x 1 x 3 inches Item Weight 8 ounces
Frequently Asked Questions
Will the black base and felt pads clash with my living room aesthetic?
The base is a low-profile 1 3/8 inch black disc with a slim 1/2 inch profile, designed to sit tucked under furniture legs and out of sight. The included felt pads match the black base for a clean, intentional look that disappears under most sofas, chairs, and tables.
Do the levelers make furniture look bulky or industrial?
No. Once installed, only the 1 3/8 inch nylon base contacts the floor. The steel socket and T-nut are concealed inside the leg, so the visible footprint stays minimal and clean, even on visible pieces like dining chairs and side tables.
Can I use these to level an antique desk I refinished as a bathroom vanity?
Yes. Customers have used these levelers to stabilize refinished antique pieces on tile and stone floors. The 3/4 to 1 3/4 inch range covers most vanity heights, and the nylon base will not mark tile or stone.
Will the felt pads stay in place or peel off over time?
The high-density felt pads press-fit into the nylon base and stay attached during normal use. For high-traffic pieces, you can add a small dot of craft adhesive for a permanent bond.
Do the levelers work on a mid-century style credenza I want to float on the wall side?
Yes. The slim black base fits under most mid-century legs, and the adjustable range lets you push the credenza flush against the wall to eliminate the visible gap that often shows with shorter or damaged original feet.
I am decorating a cozy bedroom, will these fit under a low-profile platform bed?
The 3/4 inch minimum height works under most platform beds. If your bed frame sits very low, you may want to verify at least 3/4 inch of clearance under the leg attachment point before installing.
Do they come in a finish that matches warm wood tones?
This model ships in black. The levelers are designed to be hidden under the furniture, so most customers find the black base reads as a shadow rather than a visible hardware element.
Can I use these to level a tall bookshelf in my reading nook?
Yes. With a 1320 lb total load capacity across four feet, the levelers support heavy loaded bookshelves, and the adjustable range lets you tilt the unit slightly back to prevent forward tipping.
How do adjustable levelers compare to those stick-on felt pads for style?
Stick-on felt pads sit at fixed height and only protect the floor. Adjustable levelers serve the same floor-protection role, but also let you dial in exact height and eliminate wobble, giving a more planted, intentional look to the room.
Are these levelers better looking than shimming with cardboard?
Yes. Cardboard shims are visible, collect dust, and compress over time. These levelers provide a clean, hidden, adjustable solution that keeps the furniture line looking intentional from every angle.
Will they damage my newly refinished hardwood floor?
No. The 1 3/8 inch nylon base is floor-safe on hardwood, and the included high-density felt pads add an extra layer of protection that prevents scratches and scuff marks.
Do they look cheap next to high-end furniture?
Customers describe the construction as hefty and sturdy rather than thin or flimsy. The chamfered screw holes and clean black finish read as commercial-grade hardware, not disposable plastic.
I just bought a vintage dining set, will the levelers match the period look?
Yes. Because the levelers hide under the leg and only the slim black base touches the floor, they do not interfere with the period silhouette or visible joinery of vintage pieces.
Can the levelers raise my couch to clear a thick area rug?
Yes. The 3/4 to 1 3/4 inch range is specifically wide enough to lift couches and chairs over thick rugs, rug pads, and even heating vents without losing stability.
Will the black base show pet hair and dust?
The matte black finish hides most dust and pet hair compared to lighter bases. A quick swipe with a microfiber cloth during regular cleaning keeps the base looking clean.
I care about a calm uncluttered look, will the levelers add visual noise?
No. The leveler base is only 1 3/8 inch wide and sits flat against the floor, so it reads as part of the furniture footprint rather than an added element in the room.
How do I install the Anwenk leveling feet on a pre-threaded furniture leg?
Screw the steel insert directly into the existing 3/8-16 threaded leg by hand, then thread the nylon base onto the insert. Adjust height by turning the base with the included wrench until the furniture is level and the wobble stops.
How do I install the levelers on a solid wood leg with no existing thread?
Drill a 3/8 inch hole in the bottom center of the leg, drop in the included T-nut from inside the leg cavity or from below if the leg is solid, then screw the steel insert into the T-nut. Attach the base and adjust as needed.
How do I weld the socket to a steel tube leg for a custom build?
The mounting socket can be TIG welded directly to steel tube stock. Use the screw holes to clamp the socket in place during fitting, then weld around the base. The chamfered screw holes accept flat head screws for a flush mount when not welding.
Will these levelers fit my furniture that uses a different thread size?
The kit uses a standard 3/8-16 thread, which is the most common furniture leg thread in North America. If your leg uses a finer or coarser thread, you will need a thread adapter or a different leveler model.
Are these compatible with IKEA-style adjustable legs or signature feet?
IKEA legs use a mix of metric thread sizes, most commonly M8 or M10. These levelers use the 3/8-16 standard thread, so they will only fit IKEA legs that use that exact thread or that you can re-tap to 3/8-16.
What is included in the box?
The 4-pack includes four steel threaded inserts, four nylon bases with felt pads, T-nuts and mounting screws for non-threaded legs, and an adjustment wrench. Everything needed for both threaded and basic wood installation is in the kit.
Are the levelers safe for hardwood, tile, and laminate floors?
Yes. The 1 3/8 inch nylon base is floor-safe on hardwood, tile, laminate, and vinyl, and the included high-density felt pads add an extra layer of protection for hardwood and other soft surfaces.
Will the levelers rust or stain the floor over time?
The exposed base is nylon, which does not rust or leave residue. The steel insert sits inside the leg and is not in contact with the floor, so there is no rust risk to the flooring surface.
How do adjustable leveling feet compare to furniture cups or fixed glides?
Furniture cups and fixed glides offer no height adjustment and only work on flat floors. Adjustable leveling feet let you dial in exact height on each corner, so the piece sits truly level even on significantly uneven floors, and they support far higher loads than cups or glides.
