ATB Outdoor LED Strip Mounting Clips for Patio and Garden Eaves, 100-Pack Waterproof Strip Fixing Brackets with Rust-Proof Screws
ATB Outdoor LED Strip Mounting Clips for Patio and Garden Eaves, 100-Pack Waterproof Strip Fixing Brackets with Rust-Proof Screws
Couldn't load pickup availability
Why you'll love it
- One-side screw design halves install time and fits tight, narrow mounting surfaces where traditional two-screw clips fail
- 98% light-transmittance transparent PC keeps strips visually hidden so brightness and color temperature stay true
- UV-resistant material will not yellow outdoors, preserving a clean look for years
- Magnetic rust-proof 80°-hardness screws resist corrosion in damp and outdoor environments
- Works on wood, plastic, metal, and cement walls, eliminating the need to buy separate clip types per surface
- Bulk 100-pack with 102 screws covers long runs (recommended 3-5 clips per meter) at low per-clip cost
Perfect for
- Permanently mounting IP67 silicone-tube LED strips on outdoor walls, eaves, and garden structures
- Securing waterproof accent lighting under kitchen cabinets, inside wardrobes, and along stair guardrails
- Installing LED strips on narrow surfaces and close to edges where two-screw clips cannot reach
- Fastening LED strips on mixed substrates (wood, plastic, metal, cement) without pre-drilling on soft surfaces
- Replacing traditional two-screw clips to cut installation time on large multi-meter runs
Product Information
1, Simple designed for screwing Silicone Tube IP67 Waterproof LED light strips within 12 mm/0.48in width into wood,plastic board, metal /cement wall, such as Cabinet, wardrobe, guardrail, Eaves, Garden, Carriage,etc 2,Clear Designed and high quality material.High light transmittance and no damage to your leds color temperature .Durable plastic with UV resitant material, Perfect for indoor and outdoor use without change to yellow for a long time. 3,One side fixing by screws.Easy to arrange the light strip and maintain.Recommended to use 3-5 pieces clips for 1 meter LED strip light, will be stronger and will not fall easily.Reduce installation time. 4,Magnetic Screws: Rust-proof and 80 degree hardness suit for wood/plastic board/metal/cement wall etc 5,Package including 100 PCS Transparent Clips and 102 PCS Magnetic Screws.The Light Clips can be applied to -30 - 90 ? working temperature, and can be stored at room temperature for Long Time.
ATB-WL00410 light strip clips for 10mm/12mm wide IP67 waterproof led strip lights, which are upgrading designed,Repalce traditional two screws clips, soft silicone clips. Compared with traditional LED Strip mounting clips have follow advantage: 1. One-side screw can reduce the installation time and difficulty. And, the led strip light can be installed on a narrow surface and more closer to the edge of the surface. 2. Widen the press area between the clips and the light strip, so the clips ensure the levelness and can press the strip light more tightly. 3. Hollow height only 3.5mm/0.138inch (old one is 4.0mm). The tightness can be controlled by twisting the screw as required. 4. Pure PC transparent: light transmittance from 86% increase to 98% ,more easy to hide in plain sight,while ensuring that the brightness and color temperature of the light remain unchanged. Note: Before buying light hanger clips, please kindly check up your led strip width and height. 1.Suit for 10mm/0.39 inch and 12mm/0.48 inch IP67 silicone tube led strip light which is DC12V/24V input.The sealing height of the IP67 Silicone tube are not higher than 3.8mm/0.14 inch.(Silicone seal is elastic),The number and type of LED beads do not affect the use. 2.Don't fit for IP20/IP44/IP65 led strip light and. Installation: 1.Before installing the clips. Please use drill tools punch holes in cement wall/tile wall/thick metal surface and make the markings. For wood/thin metal surface no need puch holes in advance. 2.Putting screws through the clips and then fixed the screw in the marked mounting holes. 3.Adjust led strip and tighten the screw until the clip completely hold the light strip. 4.Check and good job. suggest 3-5 pieces clips within 1 meter strip lights. Package Including:100pcs clips and 102pcs screws
Frequently Asked Questions
Will these clips hold up in rain, sun, and freezing temperatures for permanent outdoor use?
Yes. The clips are made from UV-resistant PC with 98% light transmittance, and the included 80°-hardness magnetic screws are rust-proof. The operating range is -30°C to 90°C, so they handle snow, summer heat, and coastal humidity without yellowing or corroding.
Can I use these mounting clips on my camper, RV, or trailer for outdoor travel lighting?
Absolutely. The compact one-side screw design and rust-proof fasteners make them ideal for vibration-prone mobile installs like campers, RVs, and boat cabins. They hold 10mm and 12mm IP67 silicone-tube strips securely on wood, metal, and fiberglass panels.
Do I need to pre-drill holes to mount these clips on my wooden deck or garden fence?
No pre-drilling is needed on soft surfaces like pine, cedar, or pressure-treated decking. The single-screw design drives directly into soft wood, saving significant time on long outdoor runs.
How many clips do I need per meter for a patio eave LED strip run?
We recommend 3 to 5 clips per meter depending on the strip weight and curve of the surface. One 100-pack covers a 20-33 meter run at the standard 3 clips/meter guideline.
Will the clear plastic turn yellow after a year in direct sunlight?
No. The PC body is UV-stabilized specifically to resist yellowing. After extended outdoor exposure, the clips remain visually clear so your LED strip color and brightness stay true.
Is this a good clip for installing LED strips on my outdoor patio pergola?
Yes, this is one of the most popular outdoor use cases. The 3.5mm low profile and transparent body keep the strip nearly invisible against wood beams, while the rust-proof screws handle moisture from rain and morning dew year-round.
Can I use these to light up my outdoor signage or business storefront?
Yes. The clips work on metal, wood, and cement substrates commonly used for signage backings, and the 100-pack quantity is ideal for the long linear runs typical of storefront and signage installations.
Will these clips survive being installed on a coastal property with salt air?
The rust-proof magnetic screws are specifically chosen to resist corrosion in damp and coastal environments. Combined with the UV-stable PC body, they are well-suited for seaside patios, garden walls, and exterior lighting.
How does this compare to using hot glue or double-sided tape for outdoor LED strips?
Hot glue softens in summer heat and double-sided tape loses adhesion when wet. These mechanical clips with rust-proof screws create a permanent, weatherproof hold that will not fail after a season of rain or temperature swings.
Can I install these on concrete or brick garden walls outdoors?
Yes, with a pilot hole drilled into the masonry first. The included screws drive cleanly into pre-drilled concrete or brick, giving you a secure outdoor mounting on hard substrates that tape and glue cannot handle.
Will I have enough clips to do my entire garden lighting project in one order?
Most garden and patio projects under 20 meters are fully covered by a single 100-pack. The pack also includes 102 screws, giving you 2 spare screws for any lost or replacement needs during a long install.
My outdoor strips run along metal railings - will the magnetic screws cause any issue?
The 80°-hardness screws are made from rust-proof magnetic stainless steel for corrosion resistance, not for magnetic mounting. They will not interfere with your LED strip electronics or create electrical issues on metal railings.
What if my outdoor installation needs more than 100 clips?
Simply order multiple 100-packs. Because each pack ships with the same calibrated clip-and-screw ratio, you can scale to any project length while keeping your per-clip cost low.
How do I install these LED strip mounting clips step by step?
Step 1: Plan your clip layout, placing one clip every 20-30cm (3-5 per meter). Step 2: Hold each clip against the mounting surface and drive the single screw through the side hole. On soft wood, no pre-drilling is needed; on metal, plastic, or masonry, use a small pilot hole. Step 3: Press your 10mm or 12mm IP67 silicone-tube LED strip into the clip hollow (sealing height up to 3.8mm). Step 4: Continue along the run, ensuring the strip is fully seated in each clip. The whole process takes seconds per clip.
What tools do I need to install these clips?
You need a Phillips-head screwdriver sized to match the included screws. For hard surfaces like metal, concrete, or brick, a power drill with a small pilot bit (about 2mm) is recommended. No special tools, no crimpers, and no adhesive are required.
Can I remove and reuse a clip if I need to relocate my LED strip?
Yes. Unscrew the single screw, remove the clip from the wall, and remount it at the new location. The PC body does not deform during removal, so clips can typically be reused multiple times. You may need a fresh screw if the original hole becomes loose in soft wood.
Are these clips compatible with my 10mm wide IP67 LED strip?
Yes, the clips fit any IP67 silicone-tube LED strip with a width of 10mm and a sealing height of 3.8mm or less. This covers the vast majority of waterproof LED strips on the market.
Will these clips fit a 12mm wide LED strip as well?
Yes. The clip is designed to hold both 10mm and 12mm IP67 silicone-tube strips. The flexible hollow accommodates the wider strip while still gripping the silicone securely.
What exactly is included in the box when I open it?
Each pack contains 100 transparent PC mounting clips and 102 magnetic rust-proof screws. The 2 extra screws provide a small overage in case any are dropped or lost during install. No tools, adhesive, or LED strips are included.
Is the PC clip material durable enough for long-term indoor and outdoor use?
Yes. The clip is molded from pure PC with 98% light transmittance and built-in UV resistance. It will not yellow, crack, or become brittle across its -30°C to 90°C operating range, giving you years of reliable service indoors and outdoors.
Will the magnetic screws interfere with my LED strip electronics or RF signals?
No. The screws are static-mounted mechanical fasteners and do not carry any current. The magnetic property is incidental to their rust-proof stainless-steel composition and has no measurable effect on LED drivers, controllers, or wireless signal transmission.
What is the difference between a one-side screw clip and a traditional two-screw clip?
A traditional two-screw clip requires two drilled holes, two screws, and twice the installation time. It also needs enough flat surface area to fit both screws. A one-side screw clip uses a single screw on one side, halving install time, fitting on narrow surfaces, and delivering the same holding strength for most residential and commercial LED strip applications.
