Briidea 12V LED Light Bar – Portable Patio & Deck Illumination, Waterproof Strip for Outdoor Living
Briidea 12V LED Light Bar – Portable Patio & Deck Illumination, Waterproof Strip for Outdoor Living
Couldn't load pickup availability
Why you'll love it
- 108 LEDs deliver 1600–1800 lumens of cool-white light, bright enough to fill an RV or trailer interior without hot spots
- 12V DC design plugs straight into existing vehicle electrical systems, no inverter or rewiring needed
- Two mounting methods (3M tape and screw-in clips) let users install on smooth or rough surfaces in minutes
- Aluminum alloy base and PC lens give heat dissipation and scratch resistance for long-term vehicle use
- Waterproof construction means it survives condensation, splashes, and the vibration of mobile installations
- 4-pack value covers a whole trailer, van, or multi-zone home setup for less than buying singles
Perfect for
- Bright general illumination inside enclosed cargo trailers and box trucks
- Interior living-area lighting for RVs, campers, and converted vans
- Portable work and repair light for roadside or garage vehicle jobs
- Camping and emergency lighting in 12V setups
- Under-cabinet or display-case lighting in homes, offices, and shops
Product Information
[Super Bright]- This 12v LED light strip uses 3 rows of 120 high quality LEDs, 6500K/1800Lm light output. This led trailer lights have undergone strict quality control to ensure the lifespan of the LED beads is over 50,000 hours [Wide Application] -This 12V LED light fixture can be used as emergency light, camping lights, vehicle repair lights, car interior lights, RV van work lights, cabinet lights, display light, cargo trailer enclosed trailer, etc. Suitable for home, office, cabinet, commercial space, etc [Premium Material] -This 12v led light strip adopts an 11.8 inch extension cable, scratch-resistant aluminum alloy base, and high-efficiency light-transmitting PC film, which makes the LED interior light strip ultimate durability, flexibility, and efficient heat dissipation [Easy to Install] -Just connect the red wire of the enclosed trailer lights to the power "+" pole and the black wire to the power "-" pole. There are 2 surface mount methods inside this camper light, including double-sided tape and snap-on brackets and screws [Package Included] -Package includes 4*12v LED light, 4*strong self-adhesive tape, 8*stainless steel clips and 8*stainless steel screws. The switch is at the end of the light bar. If you have any questions about our 12 volt led lights bars, please contact us in time
Features & Specs Compatible with Vehicle Type Car, Enclosed Cargo Trailer, RV, Truck, Van, Watercraft Voltage 12 Volts Light Source Type LED Form Factor Bar Auto Part Position Inside Connectivity Technology Wired Fit Type Universal Fit Water Resistance Level Waterproof Includes Remote? No Additional details Color White Material Type Aluminum, Polycarbonate (PC)
Frequently Asked Questions
Will the waterproof housing hold up to rain if I mount it under a patio awning?
Yes, the IP-rated waterproof design is built to handle splashes, condensation, and the moisture that builds up in open-air and semi-covered spaces like patios, awnings, and truck canopies.
Can I power this light bar from a portable 12V battery pack for camping?
Absolutely. The 12V DC input connects directly to any 12V battery system, including portable power stations, deep-cycle marine batteries, and lithium camping packs, so you can set up off-grid lighting anywhere.
Is 1600–1800 lumens too bright for outdoor dining on a small table?
The integrated on/off switch at the end of the bar gives you one-touch control, and because the bar runs cool it can be mounted overhead or behind seating to wash a patio table with usable but not harsh light.
How portable is the 4-pack setup for a tailgate or picnic?
Each bar is a slim, lightweight aluminum strip that you can peel off 3M tape, reposition, or carry to a new location. Many outdoor buyers use two bars at home and pack the others in a vehicle for events.
Does the cool-white 6500K color work for a backyard ambiance?
Cool-white light is ideal for outdoor task visibility such as grilling, loading gear, or working on a vehicle. If you prefer a softer patio glow, the bar can be dimmed with a compatible inline 12V dimmer for evening relaxation.
Is this a good last-minute upgrade for a weekend camping trip?
Yes, the 4-pack installs in minutes with the included 3M tape and screw clips, and the 11.8-inch extension cable makes it easy to route to your existing 12V socket or battery terminal without extra wiring.
Can I leave the bars mounted outside year-round on a trailer?
The waterproof housing, aluminum alloy base, and PC lens are designed for constant vibration and weather exposure, so permanent outdoor mounting on a trailer, boat deck, or utility shed is well within spec.
Does the cool-white output attract fewer bugs than warm outdoor lights?
Cool-white 6500K LEDs attract noticeably fewer insects than the warm yellow tones of halogen or incandescent outdoor bulbs, which is a real bonus for patio dining and campsite use.
How does this compare to battery-powered puck lights for outdoor setups?
A single 108-LED bar floods a much larger area than a puck light, and because it runs on your 12V battery you skip the cycle of replacing or recharging AA cells, making it a stronger choice for longer outdoor sessions.
Will the bar rust or corrode if it gets splashed at the dock?
The aluminum alloy base resists corrosion, the PC film lens won't yellow, and the housing is sealed against water intrusion, so splashes and humid marine air will not degrade the bar over time.
Is the mounting tape strong enough to hold the bar on a rough wood deck railing?
For smooth surfaces the 3M tape is typically enough on its own, but for rough wood, metal truck beds, or fiberglass we recommend using the included stainless steel clips and screws for a permanent, vibration-proof hold.
What if the bar gets knocked around in my truck bed during off-road trips?
The aluminum housing and solid-state LEDs are built for vehicle vibration, and the IP-rated seal keeps dust and moisture out, so rough trails and loaded truck beds are exactly the environment this bar is engineered for.
I only need one bar outside right now, can I use the rest later?
The 4-pack lets you start with a single outdoor install and keep the other three as spares for a van, trailer, shed, or home project, which is one of the main reasons buyers choose the multi-pack over singles.
How do I install the 12V LED light bar in my trailer or RV?
Clean the mounting surface, peel off the 3M backing (or use the included stainless steel clips and screws for rough surfaces), press the bar in place, and connect the leads to your nearest 12V DC source using the 11.8-inch extension cable. Use the integrated end switch to test the connection.
Can I wire multiple bars together to one switch or fuse?
Yes. Each bar draws about 6 watts, so four bars draw roughly 24 watts (around 2 amps at 12V). You can run them from a single fused 12V circuit, but for cleanest installs we recommend a small distribution block and a dedicated inline fuse near the battery or power source.
How do I extend the cable if the included 11.8-inch lead is too short?
You can splice in any 12V-compatible two-conductor wire of the same or lower gauge. Match polarity (positive to positive, negative to negative), solder or crimp the connections, and seal the joint with heat-shrink tubing to keep the waterproof rating intact.
Will this 12V bar work with my boat, golf cart, or solar battery system?
Yes, the bar accepts any stable 12V DC input, including marine batteries, golf cart 12V accessories, and solar charge controller 12V outputs. Just confirm the source is regulated 12V DC and properly fused.
Is it compatible with dimmers or smart switches?
The bar is compatible with standard 12V inline PWM dimmers and 12V-compatible smart controllers. Simply install the dimmer between the bar and the power source to add dimming, scheduling, or voice control.
What is included in the 4-pack box?
You receive four 108-LED aluminum light bars with integrated switches, four 11.8-inch extension cables, 3M self-adhesive mounting tape, and a stainless steel clip and screw set for permanent mounting. You supply the 12V power source and any zip ties or additional wire you want to use for routing.
Is this product safe to leave on for long periods?
Yes. The LEDs are rated for 50,000+ hours, the housing is sealed, and the aluminum base dissipates heat efficiently, so continuous operation in an RV, trailer, or off-grid setup is well within the design specification.
What is the actual warranty or return policy on this product?
Warranty and return terms are set by the seller or Shopify storefront where you purchase the bar, so please review the listing's policy page or contact the seller directly for the most accurate, up-to-date information.
What is the difference between a 12V LED light bar and a battery-powered LED puck light?
A 12V LED bar runs continuously off your vehicle, marine, or off-grid battery system with no cells to replace, and typically delivers far more output per fixture than a battery-powered puck. Puck lights are convenient for short, portable use, while a 12V bar is the right choice for permanent or semi-permanent vehicle, trailer, and off-grid installations.
