Briidea Glow Puck Light – Flameless Night Light for Bedroom, Motion Activated for Safe Late Night Trips
Briidea Glow Puck Light – Flameless Night Light for Bedroom, Motion Activated for Safe Late Night Trips
Couldn't load pickup availability
Why you'll love it
- No wiring or electrician needed — magnetic and adhesive mounting preserves walls and renter deposits
- Rechargeable battery eliminates the recurring cost and waste of AAA or coin-cell replacements
- Motion sensor with 30-second auto-off means the light is only on when actually needed, extending battery life to 1-2 months per charge
- Three modes (steady-on, night-only sensor, all-day sensor) adapt to closet, hallway, and daytime task use with one device
- Compact 3.15-inch disc disappears into cabinetry and shelves for an uncluttered look
- Adjustable brightness via press-and-hold gives a soft glow for sleeping or a brighter beam for finding clothes
Perfect for
- Hands-free nighttime navigation to bathroom or kitchen without flipping wall switches
- Illuminating dark closets and wardrobes when doors open or someone approaches
- Under-cabinet task lighting for kitchen countertops and prep areas
- Stick-on night light for kids' rooms that turns on only when they get out of bed
- Temporary lighting in rentals where hardwiring puck lights is not allowed
Simple Installation
Method 1 : Magnetic installation
step1:Peel off the blue plastic protective film. step2:Remove the tape on the back
step3:Tape the iron sheet to the location where it needs to be mounted
step4:Align the square magnet on the back of the sensor light with the iron plate to install.
Method 2 : Just hang it on any hook
Product Information
【3 Operating Modes】 Mode 1: Flash once for steady-on mode, where the light remains continuously illuminated. Mode 2: Flash twice for night sensor mode, where the light automatically activates when someone approaches in dark environments. Mode 3: Flash three times for all-day sensor mode, where the light automatically activates whenever someone approaches, regardless of day or night. In sensor mode, the night light will automatically turn off 30 seconds after the person leaves. 【Mode Selection & Brightness Adjustment】 Tap the switch to toggle between operating modes. Press and hold the switch to adjust the sensor light's brightness. When brightness reaches maximum, press and hold again to dim. When brightness reaches minimum, press and hold again to brighten. Simply release the button at your desired brightness level to lock it in. 【Simple Installation】 The closet light has a built-in magnet that can be attached directly to an iron surface, or mounted anywhere with the included iron piece, or hung on the wall with a hook, very convenient! 【Small Size & Wide Application】 This cabinet light is only 3.15 inches in diameter, perfect for use as an indoor sensor light, no matter where you need to add extra lighting in closets, bedrooms, stairs, countertops, kitchens, etc., it's perfect for the job. 【USB Charging】 This round sensor light has a rechargeable function, can be used for a long time, use the regular usb charging cable can be charged, only 3 hours can be fully charged, full power working time up to 1 to 2 months!
Features & Specs Bulb Base E26 Switch Type Push Button Additional Features Induction function, Rechargeable Light Source Type LED Power Source Battery Powered Number of Light Sources 8 Is Waterproof False Mounting Type Hanging Lighting Method Adjustable Control Method Push Button Water Resistance Level Not Water Resistant Voltage 5 Volts Brightness 60 Lumen Is Product Cordless Yes Style Finish Types Polished Style Name Modern Color black and white Shape Round Measurements Item Dimensions D x W x H 3.15"D x 3.15"W x 0.6"H Item Weight 0.1 Pounds Base Diameter 3.15 Inches
Frequently Asked Questions
Does the Briidea puck light stay cool enough to touch all night long?
Yes. The Briidea LED puck light uses a cool running LED module that stays at a low, touch safe temperature even after hours of steady use, so it is safe around curious children, pets, and elderly hands in bedrooms and hallways.
Is the motion sensor light actually flameless and smoke free?
Correct. There is no wick, no flame, no hot bulb and no combustion of any kind, which means zero smoke, zero soot and zero carbon monoxide concern. It is a clean air alternative to candles for nurseries and senior bedrooms.
Will the automatic shutoff timer really prevent the light from being left on?
Yes. Built into the motion sensor mode is a 30 second auto shutoff. After the last detected movement the Briidea light switches itself off, removing the worry of forgetting to turn off a hallway or bathroom path light overnight.
Is the rechargeable battery safe to leave plugged in overnight?
Yes. The Briidea puck light uses a protected lithium cell with built in overcharge and short circuit protection, and the USB C charging cycle is designed so you can leave it on the cable overnight and wake up to a full charge.
Can the light fall off the wall and become a tripping or fire risk?
No. The included iron adhesive plate is paired with a strong built in magnet, giving the Briidea light a secure hold on drywall, tile, wood, and metal. It is designed to stay put yet still lift off for recharging without damaging the wall.
Is this light a good choice for someone switching away from open flame candles for safety reasons?
Yes. The Briidea LED puck light gives the warm, ambient glow people look for in a candle without the fire, wax drip, or air quality concerns, making it a direct safety upgrade for bedrooms, bathrooms, and living rooms.
Will the sensor trigger in the dark and wake up a light sleeping child or partner?
No. The night only mode requires the room to be dark before the motion sensor activates, and the soft 60 lumen output is gentle enough not to startle light sleepers in a nursery or shared bedroom.
Is the Briidea light safer than a battery operated tea light for a senior's bedside?
Yes. There is no exposed flame and no hot wax reservoir, and the motion activated mode means the senior does not have to fumble for a tiny switch in the middle of the night, reducing the risk of drops, burns, and falls.
Does the light have any small parts a toddler could pull off and swallow?
The Briidea puck light is a single sealed disc with no user serviceable small parts on the outside. The screws and charging port are internal, and there are no coin cells or AAA batteries for a child to access.
How does a rechargeable LED compare to a plug in night light for child safety?
A rechargeable LED removes the trailing cord that a child could pull on, while still providing the same reliable glow. The Briidea light is cordless during use, so there is nothing to trip over and nothing to chew on in a nursery or playroom.
Is 60 lumens bright enough to see by, or will I still bump into things?
Sixty lumens is calibrated as a soft navigational beam. It is bright enough to outline a hallway, staircase edge, or bathroom path so you can walk safely, while staying low enough not to wake a household.
What happens if the adhesive plate fails and the light falls?
The Briidea disc weighs only a few ounces and the LED has no fragile filament, so a fall is unlikely to break it or cause a hazard. The included iron plate is also rated to hold well above the light's weight on clean, flat surfaces.
I am worried about leaving any device on while sleeping. Is the Briidea really low risk?
Yes. The light uses a low voltage LED, a protected lithium cell, and an auto shutoff sensor. There is no heat buildup, no open flame, and no continuous draw once motion stops, making it one of the safest night lighting options for a bedroom.
How do I charge the Briidea puck light?
Lift the disc off its magnetic mount, plug a USB C cable into the port on the back, and connect the other end to any USB wall adapter, power bank, or computer. A full charge takes about 3 hours and the light will then run for 1 to 2 months in motion sensor mode.
How do I switch between the three operating modes?
Press the top of the Briidea light once to turn it on in steady mode, press again for night only motion sensor, and press a third time for 24 hour motion sensor. Pressing a fourth time turns the light off. The mode you select last is remembered for next time.
How do I adjust the brightness and lock it?
While the Briidea light is on, press and hold the top of the disc to dim down, then release and press and hold again to brighten up. The light will remember the last brightness you set and return to that level the next time it turns on.
Does the Briidea light work on every wall surface?
It works on any clean, flat surface including painted drywall, wood, tile, metal, and smooth wallpaper. For very textured or porous walls, mount the included iron adhesive plate on a small flat test area or attach the light directly to a metal shelf or appliance.
Will it stick to a metal surface without the adhesive plate?
Yes. The Briidea light has a built in magnet, so it attaches directly to any ferrous metal surface like a fridge, metal shelf, garage rack, or filing cabinet, with no adhesive plate required.
What is in the box when I open it?
Each Briidea order includes two LED puck lights, two iron adhesive mounting plates with 3M style backing, a USB C charging cable, and a quick start guide. You provide your own USB wall adapter, though any phone charger will work.
Is the LED light safe to leave on while I sleep?
Yes. The Briidea LED is low voltage, cool running, and flicker free, and in motion sensor mode it automatically shuts off 30 seconds after you leave the area, so it is one of the safest options for overnight bedroom and nursery use.
What if my light arrives damaged or stops working?
Contact Briidea customer support with your order number and a quick description or photo of the issue. The puck light is covered by a manufacturer warranty, and the team will arrange a replacement or refund rather than asking you to troubleshoot a defective unit.
What is the difference between a puck light and a strip light?
A strip light is a long, flexible ribbon of LEDs meant to run in a continuous line under a cabinet or along a ceiling, while a puck light is a small round disc that throws a focused pool of light. Puck lights are easier to install without tools, are more renter friendly, and give a more designer style spot of light, while strip lights cover longer runs of space.
