DC 12V Waterproof 1Ft LED Strip – Portable Patio and Campsite Accent Lighting, 6-Pack Multi-Color
DC 12V Waterproof 1Ft LED Strip – Portable Patio and Campsite Accent Lighting, 6-Pack Multi-Color
Couldn't load pickup availability
Why you'll love it
- Waterproof design lets lights survive rain, puddles, and road spray without failure
- Self-adhesive backing and 1ft flexible strips install in minutes without drilling or brackets
- Low power draw protects the vehicle battery during extended parked displays
- Six-pack value lets buyers outfit multiple zones or vehicles from one purchase
- Bendable PVC strips conform to concave and convex body panels for clean, factory-looking fit
- Six color variants let buyers match team colors, mood, or existing vehicle theme
- Can be cut at every 3rd LED (starting from end opposite the wires) to shorten strip while keeping remaining LEDs working
- Brightness suitable for daytime visibility when used as opera lights
- Low profile allows fitting behind shallow lenses
- Single-color output is preferred over multi-color cycling RGB alternatives that look 'cheesy'
- Wire length is intentionally short so users can run their own gauge wire to the desired length
- Thicker-than-expected rubber coating suggests good durability/longevity
- Strip can be bent to fit on curved surfaces like mower fenders
- Fades out properly when wired to a door-switched circuit (e.g., Jeep floor lights)
- Very bright for the size and price point
Perfect for
- Adding underbody glow lighting to a car or truck for nighttime aesthetics
- Accent lighting for motorcycle or ATV frames on rides
- Custom interior cabin or footwell mood lighting on a 12V system
- Trunk or cargo area illumination for finding items in low light
- Show car and meet-up visual customization with color-coordinated lighting
- Replacing dim LEDs inside Christmas blow-up inflatables (Yoda and others) by soldering to existing power wires and hot-gluing into plastic housing
- Adding interior lighting to an RV shower skylight wired to existing bathroom lights
- Brightening antique radio dial lights by cutting strip to size
- Powering a Bluetooth audio board in an antique radio using 3 LiIon batteries
- Replacing yellow floor lights on a Jeep with whiter LED strips, tapping into door-switched power so they fade with doors
- Upgrading a kid's Power Wheels with LED strips
- Using 9V instead of 12V to intentionally dim/reduce output
- Replacing weak dial lights in antique radios
- Installing additional ambient lighting in 5th wheel basement area tied to a switch
- Adding opera lights to a Caprice bezel (requiring cutting two strips to extend wire length)
- Mounting on a riding mower rear for visibility/looks
- Replacing garage-cycling RGB phone-app lights with single-color ambient car lighting
Product Information
Self adhesive back led strip ,easy to install waterproof easy to clean Low power consumption,long service life small size rich colors free to bend and can be fixed in concave and convex surfaces arbitrarily
Features & Specs Compatible with Vehicle Type Car Voltage 12 Volts (DC) Light Source Type LED Form Factor Strip Auto Part Position Rear Fit Type Universal Fit Additional Features Low consumption, easy installation Water Resistance Level Waterproof Includes Remote? No Measurements Item Dimensions 11.81 x 0.35 x 0.12 inches Item Weight 0.04 Kilograms Number of Pieces 6 Additional details Color White Material Type Polyvinyl Chloride (PVC)
Frequently Asked Questions
Can I use these LED strips outside in rain and still expect them to work?
Yes. The sealed PVC housing and waterproof design are built for wet conditions including rain, road spray, and puddles, so they hold up well in open-air patio, campsite, and tailgate settings.
Are these strips easy to bring along on camping or fishing trips?
Yes. The 1-foot flexible strips are lightweight, peel-and-stick, and run on any 12V source, so you can mount them on a camper, awning, picnic table, or cooler and remove them later without tools.
Will the adhesive hold up on rough outdoor surfaces like wood or metal?
The pre-applied 3M-style backing sticks firmly to clean, smooth surfaces. For best outdoor results, wipe the mounting area with alcohol first and press the strip firmly in place for 30 seconds.
Can I power these with a portable battery pack outdoors?
Yes. Any 12V DC source works, including a portable jump starter or a 12V battery box, which makes them a convenient option for camping, boat docks, and tailgate parties.
How bright are they in open daylight at a campsite?
With 12 SMD LEDs per 1-foot strip, they produce bright, even output that reads well in shaded outdoor areas and at dusk, and they remain visible at night from a distance.
What should I buy for a backyard movie night setup?
This 6-pack works well for outlining a screen, lighting a walkway, or accenting seating. Pair with a 12V power supply, extension wire of your choice, and optional mounting clips for a clean temporary install.
Are these a good patio accent for renters who cannot drill?
Yes. The peel-and-stick backing and removable design make them a renter-friendly patio accent that does not require drilling, brackets, or permanent modification.
How do these compare to solar-powered string lights for outdoor use?
Solar string lights are decorative but dim and weather-dependent. These 12V LED strips give you brighter, more consistent output, single-color control, and the ability to wire them into a real 12V system if you want reliability.
Could I use these on a boat trailer for backing up at night?
Yes, that is a common use. Many boat owners mount them to the trailer frame as a backing light, and the waterproof PVC housing handles splash and road grime without issue.
Will heat or sun exposure make the adhesive fail on a hot day?
Prolonged direct sun can soften adhesive over time. For permanent outdoor mounting, add a bead of clear silicone at the edges or hot-glue the ends to lock the strip in place through temperature swings.
Are they safe to leave outside overnight in a storm?
Yes, the waterproof sealed housing is designed for continuous wet exposure, so overnight rain or storms are not a concern for the strip itself as long as the wire splice is also sealed with heat shrink or silicone.
What is the biggest hesitation before buying these for outdoor use?
Buyers most often worry about whether a low-cost 12V strip can really survive repeated rain. The thicker-than-expected rubber coating and sealed PVC housing are what set this product apart from generic strips.
Will cold winter weather crack the strip?
The flexible PVC body tolerates typical winter temperatures and remains bendable. Avoid folding the strip sharply in extreme cold, and let it warm slightly before repositioning.
Do I need a special controller or remote for outdoor use?
No controller is required. These are single-color strips, so you simply connect the included 6-inch lead wires to any 12V source and they turn on, which keeps the outdoor setup simple and reliable.
Can I cut them to fit a curved patio railing?
Yes. The strip can be cut at every third LED from the end opposite the wires, and the remaining strip continues to work, so you can size pieces for railings, planters, or umbrella poles.
How do they compare to battery-powered puck lights for outdoor ambiance?
Puck lights are portable but dim, and batteries need constant replacing. These 12V strips are brighter, draw minimal current, and run all night from a small 12V battery without battery swaps.
How do I install these LED strips on my vehicle?
Clean the mounting surface with isopropyl alcohol, peel the backing, press the strip in place for 30 seconds, then splice the 6-inch lead wires into your existing 12V circuit. No drilling or brackets are required.
Can I cut the strip to a shorter length?
Yes. Cut only at the marked cut points, which fall between every third LED starting from the end opposite the wires. The remaining strip continues to work, and the cut piece can be discarded or re-wired if you add your own leads.
How do I wire these into a door-switched circuit so they fade with the doors?
Splice the strip's lead wires into the circuit feeding your existing door-switched bulb, matching positive and negative. When the door opens the strip will fade on with the interior lights, and fade out when the door closes, just like factory opera lights.
Will these work on any 12V car, motorcycle, or RV battery?
Yes. The strips are designed for standard 12V DC systems found in cars, trucks, motorcycles, ATVs, RVs, and most trailers, so they connect directly without a separate driver or transformer.
Do I need anything else to complete the install?
You will need basic tools: wire strippers, crimp connectors or solder, heat shrink or electrical tape, and optionally a switch or fuse tap depending on where you are drawing power from. The strips themselves come ready to splice.
What is included in the box?
You receive six 1-foot LED strips, each with 12 SMD LEDs, pre-soldered 6-inch lead wires, and a pre-applied adhesive backing. No extra wiring, switches, or mounting hardware is included.
Are these strips safe to leave on for hours at a show without draining my battery?
Yes. The strips draw very little current, so six of them running together for a full evening at a car show or meet will not noticeably affect a healthy vehicle battery, especially if the engine is idled periodically.
Will the waterproof rating hold up to pressure washing or wheel-well spray?
The sealed PVC housing handles normal road spray, rain, and light washing well. For high-pressure washing, avoid aiming directly at the strip edges and make sure the wire entry point is sealed to keep water out long term.
How do these single-color LED strips differ from RGB color-changing strips?
Single-color strips produce one clean, consistent color throughout their life with no controller, no remote, and no color cycling. RGB strips can change colors via an app or remote but often look busy and require extra wiring and a controller box.
