Frienda LED Trailer Tail Light Bar – High Visibility Stop Turn Tail Light for Safer Highway Towing
Frienda LED Trailer Tail Light Bar – High Visibility Stop Turn Tail Light for Safer Highway Towing
Couldn't load pickup availability
Why you'll love it
- All-in-one 2-pack kit with mounting screws and screw caps means no extra hardware shopping
- IP67 waterproof and shockproof rating protects against rain, dust, and rough road vibration
- Wide 9–30V voltage range fits both 12V passenger trucks and 24V commercial semi-trailers
- Color-coded 3-wire system (black/red/green) makes DIY installation straightforward without rewiring guesswork
- Three lens color options (Red, Clear, Amber) let buyers match the light to its function — brake, reverse, or turn
- 15 LEDs per 10-inch bar deliver brighter output and longer lifespan than traditional incandescent trailer lights
Perfect for
- Replacing broken or dim incandescent tail light bars on trailers with brighter LED units
- Adding a third brake identification light strip for DOT compliance on trucks and pickups
- Upgrading marine boat trailer lighting to waterproof LED for saltwater environments
- Wiring multi-function stop/turn/tail/marker lights on semi-trailers and cargo trailers
- Side marker and clearance lighting installation on heavy-duty working vehicles
Product Information
Package includes: two LED lights, four screws and four screw caps. You don't need to prepare other accessories for installing this light Good quality: using IP67 waterproof material, can ensure the normal use in rainy and humid environment, at the same time, it has quality shockproof and dustproof function, can protect LED lamp from sand and rain, even in bad weather and environment, they can also provide you with reliable lighting Easy to Install: Black wire - ground; Red Wire - high brightness; Green Wire - low brightness. Package Included: 2 x LED tail light, 4 x screws, 4 x screws caps; The distance between the 2 screw holes is 9.25 inches/ 23.5 cm, and the diameter of the screw holes is approx. 0.2 inches/ 0.5 cm; Please confirm the product size before purchase Wide applied: It can be widely applied in most types of heavy trucks, semi trailers, cargo trailers, marine trailers, working vehicles and other land vehicles requiring rated lighting Application: It is suitable for marker, nice replacement light, stop brake light, side marker light, indicator light, turn light, clearance light, real light, roof light, grill light, identification light, real bumper lights, auxiliary driving lights, etc
Features & Specs Specific Uses For Product Third Brake Lights Light Source LED Compatible with Vehicle Type Trailer, Truck Additional Features Waterproof Voltage 30 Volts Auto Part Position Rear Style Color Red Cover Lens Color Red
Frequently Asked Questions
Will this LED bar make my trailer more visible to other drivers at night?
Yes. The 15 LEDs per 10 inch bar produce brighter, more even output than traditional incandescent trailer lights, which helps following drivers see your stop, turn, and tail signals more clearly in low light.
Does adding a third brake light strip like this help with DOT compliance?
In many cases yes. A third brake identification light on trucks, pickups, and trailers improves conspicuity and is commonly required for DOT compliant configurations, though you should verify the specific rule that applies to your vehicle and trailer.
Is this light bar safe to leave wired in during long highway trips?
Yes. The sealed IP67 housing, shockproof construction, and wide 9 to 30V operating range are designed for sustained highway use on trucks and semi-trailers without overheating or short cycling.
Can the shockproof housing protect the LEDs from rough road vibration on unpaved roads?
Yes. The shockproof design helps the internal LEDs and circuitry withstand the constant vibration of rough or unpaved roads, reducing the risk of premature failure compared to fragile incandescent strips.
Will the bright LED output distract or blind drivers behind me at night?
No. The bar is designed as a stop, turn, and tail light with regulated brightness levels, and the red or amber lenses match the function so the light is conspicuous but not blinding when used as intended.
Is this a safe replacement for a dim or flickering incandescent tail light on my pickup?
Yes. Swapping a dim or unreliable incandescent tail light for this sealed LED bar is a common safety upgrade because the LED output is brighter, more consistent, and the sealed housing protects against the moisture that often causes incandescent failures.
Can I trust the IP67 rating when driving through heavy rain or snowstorms?
Yes. An IP67 rating means the housing is protected against rain, snow, splashing, and even temporary immersion, which is well above the exposure level of normal highway driving in storms.
Will the color-coded wiring reduce the risk of an installation mistake that causes a short?
Yes. The color coded system (black ground, red high brightness, green low brightness) removes much of the wiring guesswork, which lowers the chance of a crossed wire or short circuit during a DIY install.
Is this LED trailer light safer around fuel or flammable materials than an older light with a hot bulb?
Generally yes. LEDs run much cooler than incandescent bulbs, so they introduce less heat near fuel, hay, or other flammable cargo compared to a traditional hot filament trailer light.
Does the wide voltage range prevent flickering that could confuse drivers behind me?
Yes. The 9 to 30V range keeps the LEDs lit steadily across the normal operating voltage of both 12V and 24V systems, which helps prevent the dim or flickering output that can occur with mismatched incandescent replacements.
How does this LED bar compare to standard incandescent trailer lights for safety?
Compared to incandescents, this LED bar lights up faster, is more visible in daylight and at night, resists vibration failure, and is sealed against water, all of which contribute to a safer trailer lighting setup.
Is this safer than relying on reflective tape alone for visibility on the highway?
Yes. Reflective tape only shows up when another vehicle's headlight hits it, while an active LED tail and brake light bar signals your intentions in real time, which is a meaningful safety upgrade.
Is a sealed LED bar safer for a boat trailer than a light with vented holes that can let water in?
Yes. The IP67 sealed design is safer for marine use because it blocks the water intrusion that can corrode contacts and cause a light to fail at the ramp or in the water.
Will the screws and caps included in the kit keep the light securely mounted in a crash or hard stop?
The included screws and caps are designed to hold the bar firmly to a flat trailer surface. For extreme or high vibration applications, many owners add a thread locker or backing plate for extra security.
What if one LED fails, will the whole bar go dark and create a safety hazard?
Individual LEDs can fail without darkening the entire bar, and because each bar has 15 LEDs, the loss of one or two typically still leaves plenty of output. The lens also helps diffuse the remaining light evenly.
Is this safe for a child or pet to be around in a home garage where the trailer is parked?
Yes. The low voltage LED operation and sealed housing mean the bar does not get hot like an old incandescent bulb, so it is safer to be around in a garage where kids or pets may be present.
How do I wire this 10 inch LED trailer light bar step by step?
Connect the black wire to the vehicle or trailer ground, the red wire to the high brightness circuit (typically the brake or tail circuit), and the green wire to the low brightness circuit (typically the running light or marker circuit). Secure the bar to a flat surface using the included screws and screw caps, then test the stop, turn, tail, and marker functions before final use.
What tools do I need to install the LED trailer tail light bar?
Most installs only need basic hand tools such as a screwdriver or drill driver for the mounting screws, wire strippers, butt connectors or solder, and electrical tape or heat shrink. A test light or multimeter helps confirm which circuit is which before you connect the red and green wires.
Can I install this trailer light bar without any prior wiring experience?
Yes. The color coded three wire system (black ground, red high brightness, green low brightness) is designed to simplify DIY installation. As long as you can identify your trailer's ground, running light, and brake or turn circuits and make solid connections, the install is approachable for a first time DIYer.
Will this LED light bar work on a 12V pickup truck and a 24V semi-trailer?
Yes. The 9 to 30V operating voltage range is designed to be compatible with both 12V passenger trucks and pickups and 24V commercial semi-trailer electrical systems, so the same bar can be used across both.
Is this trailer light bar compatible with standard trailer wiring harnesses?
Yes. The black, red, and green wires can be connected to the standard ground, running light, and brake or turn signal conductors found on most trailer wiring harnesses using butt connectors, solder, or your preferred connection method.
What is included in the box when I order this kit?
The kit includes two 10 inch LED trailer light bars (with 15 LEDs each) and the mounting screws and screw caps needed to attach the bars to a flat trailer surface. The lens color variant (red, clear, or amber) is selected at the time of order.
Are the LED trailer lights safe to use in heavy rain and snow?
Yes. The IP67 waterproof and dustproof rating is designed to protect the internal electronics from rain, snow, splashing, and temporary immersion, so the lights are safe to operate in typical storm conditions encountered on the road.
How long will the LEDs last compared to a standard incandescent trailer light?
LEDs generally last significantly longer than incandescent bulbs because they have no filament to burn out and run much cooler. The sealed IP67 housing also reduces corrosion and vibration failure, which extends the real world service life of the bar.
What is the difference between an LED trailer light bar and a standard round trailer light?
An LED light bar is a flat, surface mounted strip with multiple LEDs inside a sealed housing, which is well suited for third brake, marker, or strip style installations. A standard round trailer light is typically a single sealed lamp mounted in a hole, often used for stop, turn, and tail functions in a traditional housing. The bar style offers a wide, even light pattern, while a round lamp gives a more focused point of light.
