LED Module Strip – 9.8 Ft Cool White Accent Lighting for Bedroom, Living Room and Cozy Home Decor
LED Module Strip – 9.8 Ft Cool White Accent Lighting for Bedroom, Living Room and Cozy Home Decor
Couldn't load pickup availability
Why you'll love it
- Restores broken inflatables at a fraction of replacing the whole decoration, saving holiday displays
- IP65 waterproof rating lets it survive rain and snow without short-circuiting outdoor setups
- Cuttable every 3 LEDs means a single 9.8 ft strip fits projects of any custom length
- Self-adhesive backing and screw holes give flexible mounting on curved inflatables, walls, or frames
- 12V DC low voltage is safer to handle than mains-powered alternatives, especially outdoors
- 70% energy savings versus traditional lighting cuts long-term operating costs for businesses
- Plenty of extra lights included to fix multiple inflatables with some left over
- Good adhesive quality for installation
- Cost-effective way to save inflatables from being thrown away
- Can be used as individual lights or multiple lights together
Perfect for
- Replace burnt-out LED modules inside Christmas inflatable yard decorations
- Backlight channel letter signs and light boxes for storefronts
- Custom-cut accent lighting for DIY home projects every 3 LEDs
- Weatherproof signage illumination for outdoor advertising
- Cafe, bar, or restaurant ambient and decorative wall lighting
Inflatable toy lights
Built-in 3 super bright LEDs
Comes with adhesive on the back
Injection molding module with optical lens
application
Comparison of usage effects
Lights off, lights on effect
Home Decoration
Large logo light box effect
Product Information
The length is 9.8 feet, 20 pieces, using 60 large 2835 SMD LED chips, with optical lens, 12V DC input voltage. Each module has self-adhesive tape on the back for easy installation. You can also hang them anywhere you want via the optional screw holes DC12V voltage is safe, stable and reliable; high brightness. Anti-radiation; anti-seismic, anti-impact, safe and stable; 70% energy saving, high brightness IP65 waterproof LED lights-LED module lights can work when it rains or snows without causing a short circuit. But pay special attention to the positive and negative poles of the wire to avoid short circuit。 Each 3-LED can be cut according to your requirements without damaging the rest of the lights, the tape is self-adhesive on the back, ensuring safety and ease of use LED type: High quality 2835 SMD LED, high intensity and reliability, long service life. 58,000 hours LED module lighting colorful home life, household lights Christmas inflatable lights, window lights, hotel decoration lighting colorful life, shopping malls and performing arts building decorative lighting, bridge edge lighting, security lighting and emergency lighting, widely used in backlighting signboards, hidden Lighting, advertising sign lighting, automobiles, restaurants, cafes, bars, banks, airports, railways, public advertising and notices. Channel letter backlighting, advertising signs, and light boxes. Airplane model decorative lighting or border.
Technical Details Color White Brand LIANWO Indoor/Outdoor Usage Indoor, Outdoor Special Feature Adjustable Light Source Type LED Power Source Corded Electric Light Color White Theme Christmas Style Bohemian Material Copper Color Temperature 6500 Kelvin Number of Light Sources 150 Voltage 12 Volts Wattage 36 KW Number of Items 20 Control Method Remote Item Length 120 Inches Part Number 001 Item Weight 4.2 ounces Item model number 7015 Special Features Adjustable Batteries Included? No Batteries Required? No
Frequently Asked Questions
Will 6500K cool white look too sterile for a bedroom or living room?
Cool white at 6500K gives a crisp, modern look that reads clean and bright, which works beautifully in contemporary interiors, kitchens, workspaces and accent walls. For a softer, cozier bedroom vibe, you can dim the strip, mount it behind a headboard or inside a light box so the light is diffused rather than direct.
Can I use this strip to backlight a channel letter sign in my home office or studio?
Yes. The 2835 SMD chips with optical lens and 150LM per module output are designed exactly for backlighting channel letters and light boxes. The cuttable design lets you trim the strip to fit any letter height or cabinet size, and the self-adhesive backing mounts cleanly inside the letter returns.
How do I mount the strip on a textured or painted wall without damaging the paint?
The self-adhesive backing is the cleanest option for smooth interior walls. For textured walls, we recommend using the screw mounting holes with small anchors, or mounting the strip on a removable backer strip like aluminum channel so you can take it down later without pulling paint.
Will the modules be visible as individual dots, or will the light look smooth?
Each module uses an optical lens that spreads the light evenly, so you get a clean glow rather than a harsh pinpoint. For the smoothest, most ambient effect in home decor, mount the strip inside a light box, behind a valance, or 2 to 4 inches behind a frosted diffuser panel.
Can I use this LED strip to add accent lighting under shelves, behind a TV or along a headboard?
Definitely. The cuttable every-3-LED design and 12V DC safe voltage make it ideal for DIY home accent projects under floating shelves, behind TVs, along headboards, inside bookcases and around window frames. The adhesive backing sticks well to most finished wood, metal and plastic trim.
Is this a good fit for a light box or DIY sign in a home bar or game room?
Yes, it is one of the most common uses. The 150LM per module output is bright enough to illuminate a full light box evenly, and the cool white 6500K tone gives a clean, professional glow that works especially well for bar signage, man cave logos and game room accent pieces.
What kind of aesthetic does this strip create in a living room?
Cool white 6500K paired with diffused mounting creates a modern, gallery-like atmosphere that highlights art, architectural features and shelving. It pairs especially well with minimalist, industrial, Scandinavian and contemporary decor styles where clean white light feels intentional rather than harsh.
How does this compare to a warm white strip for cozy home atmosphere?
Warm white (around 2700K to 3000K) gives a softer, candlelit feel that many people prefer for bedrooms and lounges. This strip runs at 6500K cool white, which is brighter, crisper and better for task areas, signage, and modern interiors. The choice comes down to the mood you want.
Can I install this in a rental apartment without permanent modifications?
Yes. The self-adhesive backing is removable from most smooth surfaces with gentle heat from a hair dryer, and the cuttable design means you can trim the strip to fit any rental-friendly spot like under cabinets, behind furniture or inside a freestanding light box without drilling into walls.
Will one strip be enough for a full accent lighting project in a room?
It depends on the size of the project. One 9.8 ft strip with 20 modules covers a headboard, a small light box, or a few shelves. For larger projects like a full room coving or a long display case, you can buy multiple strips and link them together using waterproof connectors. The lights can be used as individual units or as one continuous string.
Does the strip get hot enough to damage paint, fabric or wood over time?
No. LED modules run significantly cooler than incandescent or halogen lighting, and the 12V DC low-voltage design keeps surface temperatures low. It is safe to mount on painted walls, fabric headboards, paper artwork and wood trim without risk of heat damage or scorching.
Is this strip dimmable for movie nights or relaxing evenings at home?
Yes, when paired with a compatible 12V DC dimmer or PWM controller, the strip dims smoothly from full brightness down to a soft glow. The included remote control makes it easy to adjust brightness without getting up, which is great for home theater setups and evening wind-down routines.
Will the adhesive leave residue on my walls when I remove it?
On smooth, painted walls, removal with a hair dryer or heat gun usually lifts the adhesive cleanly. On porous or heavily textured surfaces, a small amount of residue is possible. For high-end paint finishes, test a small corner first or mount the strip on a removable surface instead.
How do I install this LED module strip in a Christmas inflatable?
Start by opening the inflatable and locating the existing LED modules. Note the polarity (plus and minus) of the original wiring, then peel the adhesive backing off the replacement modules and stick them into position. For extra security on curved shapes, use the built-in screw mounting holes. Reconnect to your 12V DC power supply, matching the marked polarity, and test before re-inflating.
Can I cut the strip and still have the remaining pieces work?
Yes. The strip is designed to be cut every 3 LEDs along the clearly marked cutting points without damaging the rest of the strip. Each cut piece can be wired independently, so you can use the leftovers for smaller projects or repairs. Just seal any cut ends with waterproof connectors or silicone if the strip will be exposed to moisture.
What power supply do I need to run this LED module strip?
You need a 12V DC power supply (also called an LED adapter or transformer). A 12V 2A adapter is sufficient for a full 9.8 ft strip, but for longer runs or multiple strips linked together, choose a higher amperage rating. Make sure the adapter is UL or CE listed for safety, and rated for indoor or outdoor use depending on your installation.
Is this LED module strip compatible with standard LED dimmers and controllers?
Yes. The strip works with most 12V DC PWM dimmers and RGB-compatible controllers on the market. The included remote control is one option, but you can also pair the strip with a wall-mount dimmer, smart home controller, or app-based LED controller as long as it outputs a compatible 12V DC signal.
Will this work with the old wiring from my existing inflatable or sign?
In most cases, yes. The strip uses standard 12V DC polarity and the polarity is clearly marked on the modules. As long as your existing power supply is 12V DC and the wiring is in good condition, you can reuse it. If you are switching from an older higher-voltage system, you will need to replace the power supply with a 12V DC unit.
What is included in the box?
Each package includes one 9.8 ft LED module strip with 20 pre-connected 2835 SMD LED modules, self-adhesive backing, and built-in screw mounting holes. A remote control is included for power and dimming control. You will need to purchase a 12V DC power supply and any waterproof connectors separately, depending on your installation needs.
How long will these LED modules last before I need to replace them?
The modules are rated for 58,000 hours of use, which translates to roughly 16 to 20 years of typical daily use. Real-world lifespan depends on operating temperature, power supply quality, and environmental exposure, but most customers report years of reliable service with no noticeable dimming.
Are these LED modules safe to leave plugged in 24/7?
Yes. The modules run cool, draw very little current, and are rated for continuous use. They are designed for commercial signage and holiday displays that run for extended periods. For maximum lifespan and energy savings, pair them with a timer or smart plug so they are not drawing power when not in use.
What is the difference between LED module strips and LED rope light?
LED rope light is a continuous flexible tube with LEDs inside, designed for decorative outlining and general ambient lighting. LED module strips are individual high-brightness modules with optical lenses, designed for backlighting signs, light boxes, channel letters and inflatables where brighter, more focused illumination is needed. Modules are also cuttable and repairable in ways that rope light is not.
