MAZ-TEK Motion Sensor Night Light – Soft Warm Glow for Nursery, Toddler Bedroom and Diaper Change Check-Ins
MAZ-TEK Motion Sensor Night Light – Soft Warm Glow for Nursery, Toddler Bedroom and Diaper Change Check-Ins
Couldn't load pickup availability
Why you'll love it
- Eliminates the risk of tripping in the dark on stairs and hallways with automatic 15 ft motion detection
- Costs less than $0.20 per year to run thanks to 0.5W LED efficiency
- No batteries, wiring, or electrician needed — just plug into any standard outlet
- Compact side-plug design leaves the second outlet free for other devices
- Stepless brightness slider lets users tune the glow from barely-there to clearly visible
- Warm 2700K tone is easy on sleepy eyes versus harsh blue-white night lights
Perfect for
- Hands-free night navigation from bedroom to bathroom without turning on overhead lights
- Preventing falls on dark staircases and basement steps during nighttime trips
- Gentle motion-activated glow in a nursery to check on a baby without disturbing sleep
- Plug-and-play lighting for renters in hallways or utility rooms without rewiring
- Energy-saving automatic illumination for seldom-used spaces like garages and cloakrooms
Product Information
Brightness Adjustable: 2700K soft warm white glow. With the slide switch, you can steplessly adjust the brightness from 0-25 lumen as you desired on different occasions to provide the best using experience. 3 Lighting Modes Optional: “ON” Mode - constant on at night; "OFF" Mode-Turn off the light; “AUTO” Mode - turn on automatically when motion is detected within the sensing range(MAX: 15 ft, 120°) and turn off after 20 seconds of inactivity. Easy Installation: Simple plug in light design, no need batteries and hard wiring, directly plug into anywhere with AC outlet, and it will not block the second outlet because of its compact design. Energy Efficient: Equipped with 4 LED light bulbs, the maximum power consumption of the night light is 0.5 W, so it costs you less than $0.20 per year to operate (based on 11/kWh), which helps save energy and money. Available Occasions: Perfect for indoor places like stairs, garage, kitchen, hallway, bathroom, basement, corridor, cloakroom, living room, etc. to bring you and your family safety (never tripping in the dark any more) and convenience (no need to always turn on room lights).
Technical Details Brand MAZ-TEK Color Warm White Material Plastic Style Modern Light fixture form Wall Room Type Kitchen, Living Room, Basement, Utility Room, Bathroom Product Dimensions 2.8"L x 0.75"W x 3.31"H Specific Uses For Product Hallway, Kitchen, Garage, Basement, Living Room Indoor/Outdoor Usage Indoor Power Source plug-in_electric Installation Type Plug In,Countertop Special Feature Motion Sensor, Energy Efficient, Adjustable Color Temperature Control Method Remote Light Source Type LED Finish Type Polished Shade Material Plastic Number of Light Sources 4 Voltage 110 Volts Theme Baby Light Color Warm White Shape Squre Included Components no Embellishment Adjustable Warranty Type 30-Day Refund & Replacement Lighting Method Adjustable Specification Met CE Item Weight 4.8 ounces Number of Items 1 Bulb Base E26 Controller Type Remote Control Switch Type Slide Unit Count 2.0 Count Water Resistance Level Waterproof Connectivity Protocol Homeplug Brightness 30 Lumen Efficiency High Mounting Type Floor Mount Shade Color White Fixture Type Non Removable Assembly Required No Manufacturer FUZHOU MAZ-TEK ELECTRONIC CO.,LTD Color Temperature 2700 Kelvin UPC 662565853776 Global Trade Identification Number 00662565853776 Light Output Maximum 30 Lumens Recommended Uses For Product Lighting Model Name Adjustable Brightness,Warm White Motion Activated Led Night Light for Hallway, Set Name 2 Pack Part Number MZ3100 Item model number Plug in Motion Sensor Lights with Is Discontinued By Manufacturer No Finish Polished Pattern Solid Item Package Quantity 1 Number Of Pieces 2 Special Features Motion Sensor, Energy Efficient, Adjustable Color Temperature Batteries Included? No Batteries Required? No Warranty Description 12 month warranty and lifetime technical support.
Frequently Asked Questions
Is the surface of this night light cool enough that a toddler won't get burned?
Yes. The 0.5W LED design means the housing stays cool to the touch, even after continuous use, so it is safe in a crib room, nursery, or any space where a curious child might touch or grab it.
Will the warm light disturb my baby if I check on them at night?
No. The 2700K warm white tone is specifically chosen because it is gentle on sleepy eyes, and the stepless brightness slider lets you dim it down to a soft glow that is enough to see by without waking the baby.
Does it turn on automatically when I walk into the nursery for a midnight feeding?
Yes. In AUTO mode the PIR sensor detects your movement from up to 15 ft away and lights the room softly so you can change, feed, or settle your baby without turning on a harsh overhead light.
Can my older child safely use the bathroom at night without waking me?
Yes. Place one unit in the hallway outside their room and one in the bathroom, and motion activation gives them a guided path of light with no switches to fumble for in the dark.
Are there any small parts or batteries my child could swallow?
No. It is a sealed plug in unit that runs on AC power, so there are no coin batteries, no removable covers, and no small parts that pose a choking hazard.
I need a night light for diaper changes. Is this bright enough?
The stepless brightness slider goes from a barely there glow up to about 25 to 30 lumens, which is more than enough to see your baby, wipes, and clothing clearly during a middle of the night change.
Will my child accidentally leave it on and waste electricity?
No. In AUTO mode it only stays on for 20 seconds after motion stops, so even if your child never touches the switch, the light shuts itself off after they leave the room.
Is this safe to use in a nursery with a newborn?
Yes. There is no flame, no hot bulb, no cords on the floor, and the warm tone is easy on newborn eyes, which is why many new parents choose it for the nursery and hallway outside.
Does it come in a 2 pack so I can put one in each kid's room?
Yes. The set ships as a 2 pack, which is ideal for placing one in a child's bedroom and one in the shared hallway or bathroom.
Is it safe to leave plugged in overnight in a child's room?
Yes. With no heating element, low LED wattage, and a sealed housing, it is designed for continuous overnight use in a child's bedroom or nursery.
What if my child is afraid of the dark? Will this help?
Many parents use it on the lowest brightness setting as a comfort glow, and because it turns on automatically when your child gets out of bed, they never have to walk through a completely dark room.
Is it a good night light for a shared sibling bedroom?
Yes. The motion activation means it only lights up when one child gets out of bed, and the warm dim setting is unlikely to fully wake the other child.
How does it compare to a plug in stuffed animal night light?
Stuffed animal night lights usually stay on all night at one fixed brightness, while this unit only activates with motion, dims to any level you want, and stays cool, which is often a better fit for older toddlers and kids.
How does it compare to a night light that projects stars on the ceiling?
Star projectors are fun and decorative, but they tend to be brighter, stay on all night, and can overstimulate a sleepy child, whereas this motion activated warm light is more sleep friendly and practical for navigation.
Can a 3 or 4 year old turn it on and off by themselves?
Yes. The three way mode switch is labeled ON, OFF, and AUTO, and the slide dimmer is easy for small hands to adjust, so a preschooler can learn to control their own night light.
I'm worried the bright LED will keep my baby awake. Can I dim it really low?
Yes. The stepless slider dims all the way down to a barely visible glow, which is what most parents use for sleep, then bump it up briefly for feedings and diaper changes.
How do I set up the MAZ-TEK motion sensor night light for the first time?
Plug the unit directly into any standard 110V wall outlet, slide the side switch to AUTO for motion activation or ON for constant light, and use the stepless dimmer to set your preferred brightness. No pairing, wiring, or tools are required.
How do I switch between ON, OFF, and AUTO modes?
The three way selector is on the side of the unit. Slide it to ON for steady light, OFF to fully power it down, or AUTO to use the PIR motion sensor with automatic 20 second shutoff.
How do I adjust the brightness on the night light?
Use the stepless slide switch on the side of the housing. Slide it toward the lower end for a barely there glow and toward the higher end for a clearly visible light up to about 25 to 30 lumens.
Does this night light work with any standard US wall outlet?
Yes. It is designed for standard North American 110V AC outlets and uses a side plug orientation that does not block the second receptacle.
Will it work with a power strip, extension cord, or smart plug?
It works best when plugged directly into a wall outlet, and it is compatible with most smart plugs. Some power strips may partially block the PIR sensor, so test placement before relying on motion activation in those spots.
What is included in the 2 pack box?
You will receive two MAZ-TEK plug in motion sensor night lights, a quick start guide, and the standard 12 month warranty with lifetime technical support. No extra bulbs, batteries, or accessories are needed.
Is this night light safe to leave plugged in 24/7?
Yes. The 0.5W LED design, cool running housing, and sealed construction make it safe for continuous plug in operation in bedrooms, hallways, and nurseries.
How long do the LEDs last, and is the unit repairable?
The LEDs are rated for tens of thousands of hours of use, which at typical motion activated duty cycles translates to many years of service. The unit is sealed and not user serviceable, but lifetime technical support is included for troubleshooting.
What is the difference between a motion sensor night light and a regular plug in night light?
A regular plug in night light stays on continuously and uses more energy, while a motion sensor night light only turns on when it detects movement within range and shuts off automatically, giving you light on demand with much lower energy use and no harsh light shining all night.
