VOLTRONIC GlowStrip LED Strip Lights – Bedroom Decor Accent, Color Changing RGB Ambient Lighting
VOLTRONIC GlowStrip LED Strip Lights – Bedroom Decor Accent, Color Changing RGB Ambient Lighting
Couldn't load pickup availability
Why you'll love it
- Battery powered so no outlet or wiring needed, perfect for rentals and travel
- Low 5V voltage eliminates electrical hazard risk around kids and pets
- Cuttable strips allow custom fit for any space
- Remote control with color, brightness, and scene mode for instant mood change
- Adhesive backing enables tool-free installation on most surfaces
- Two length options (3.3ft and 6.6ft) fit different TV sizes and rooms
Perfect for
- TV backlight to reduce eye strain and enhance viewing experience
- Ambient mood lighting for bedroom or kitchen
- Portable lighting for camping tent without electrical hookup
- Holiday or Christmas accent decoration
- DIY custom-length accent lighting for shelving or under cabinets
Product Information
When using the string lights, align the arrow on the connector with the arrow on the battery compartment connector (positive “+” symbol), and remove the insulating plastic tab from the bottom of the remote control. Battery powered strip lights decorate your indoor space, such as dining room, kitchen, bedroom, washroom, tent, etc. With the remote control you can adjust colour, brightness, scene mode, etc. RGB SMD 5050, Powered by 3xAA battery (not included) and easy installation, super adhesive backing tape, suitable for most surfaces. Each led strip lights have 30 lamp beads, and each led can be cut.
Features & Specs Indoor Outdoor Usage Indoor Additional Features Waterproof Light Source Type LED Power Source Battery Powered Light Color Multicolor Controller Type Remote Control Connectivity Protocol Remote Control Voltage 5 Volts Wattage 7.5 watts Control Method Remote Water Resistance Level Not Water Resistant Number of Batteries 3 AA batteries required. Style Color RGB (Red, Green, Blue) Theme Space Occasion Christmas Product Style Modern Measurements Number of Light Sources 30 Item Weight 0.15 Pounds Number of Items 1 Item Dimensions 7.8 x 0.2 x 6 inches
Frequently Asked Questions
Will these battery LED strip lights actually make my bedroom look cozy and styled, not tacky?
Yes. The 30 SMD 5050 RGB LEDs per strip produce smooth, even color across the full length, and the adhesive backing lets you hide the strip behind a headboard, under a shelf, or along a ceiling coving so you only see the glow, not the hardware. With the remote you can dial in warm whites for everyday calm or shift to a soft amber, blush, or deep teal to match your room's palette and seasonal mood.
Can I use the strip light to highlight a feature wall, shelving, or a piece of art?
Absolutely. The flexible strip bends around corners and curves, and the 3M style adhesive backing mounts directly to the back of floating shelves, the inside of a bookcase, or along a picture ledge. Because the strip is cuttable to size, you can customize the length to frame a canvas, a mirror, or a single shelf without excess coil visible in the room.
Does the color changing feature really offer enough shades to match my decor?
The remote cycles through the full RGB color spectrum, so you can match accent pillows, throw blankets, or seasonal decor with a few button presses. Most buyers settle on two or three favorite tones for daily use and save bolder colors for movie nights or dinner parties.
Will the adhesive damage my wall paint or wallpaper when I remove it later?
The 3M style adhesive is designed to hold firmly on clean, smooth surfaces but releases with a slow, gentle peel. For renters concerned about deposit deductions, we recommend testing a small corner after 24 hours before committing to a full run.
Is 3.3ft enough for a bedroom accent or do I need the 6.6ft version?
For a single headboard glow or a small under shelf run, the 3.3ft strip is typically the right pick. For wrapping a headboard, lining a full wall ledge, or going behind a larger TV, the 6.6ft gives you the length to make the lighting read as a real design feature rather than a thin line.
How do I install the battery powered LED strip light?
Peel the protective film off the 3M style adhesive backing, press the strip firmly onto a clean, dry, smooth surface such as painted wall, wood, glass, or metal, insert three AA batteries into the battery box, and switch it on. The whole process takes under five minutes and requires no tools, no drilling, and no outlet access.
Can I cut the LED strip to fit a custom length?
Yes. The strip has clearly marked cut lines along its length. Use scissors on the marked segment only, and only cut when the strip is powered off. Once cut, the remaining segment continues to work normally and the cut end can be sealed with a small piece of tape if it will sit in a visible area.
How long do the AA batteries actually last?
Battery life depends on the brightness level and color mode you select, but on typical warm white and mid brightness settings three AA batteries power the strip for many evenings of normal use. Running on the brightest white or rapid color cycling modes will drain the batteries faster than a single soft tone.
Will this LED strip fit behind any size of TV?
The 3.3ft strip is a good match for TVs up to about 43 inches, and the 6.6ft strip is the right pick for 50 to 75 inch TVs where you want the light to run the full width of the back panel. Because both versions are cuttable, you can trim to length for smaller screens and shorter runs.
Does it work with a smart plug, smart home hub, or voice assistant like Alexa?
No, this strip is controlled exclusively with the included infrared remote and the on board battery box switch. It does not connect to Wi Fi, Bluetooth, smart home hubs, or voice assistants, which is part of what keeps the setup simple and the price point accessible.
What is included in the box?
You receive one battery powered LED strip in your selected length (3.3ft or 6.6ft), the battery box with on/off switch, one infrared remote control, and the pre applied 3M style adhesive backing on the strip itself. Three AA batteries are not included and should be purchased separately.
Is it safe to leave the LED strip on for many hours at a time?
Yes. The strip uses low 5V DC power, runs cool to the touch, and has no fan, no heating element, and no moving parts. It is designed for extended use as accent, mood, or backlight lighting and is commonly left on for entire evenings, holiday displays, and overnight nightlight use.
What surfaces will the adhesive stick to, and which ones should I avoid?
The 3M style adhesive bonds well to smooth, clean, dry surfaces including painted drywall, finished wood, glass, metal, and plastic. We do not recommend mounting on rough concrete, unpainted brick, textured wallpaper, or dirty or dusty surfaces, as the strip may release over time on these materials.
What is the difference between battery powered LED strip lights and plug in LED strip lights?
Battery powered strips run on low voltage DC from AA batteries, require no outlet, and are portable enough for camping, rentals, and kids' rooms. Plug in LED strips draw from a wall outlet, can run brighter and longer, but require a nearby socket, a power adapter, and are not practical for spaces without outlet access or for travel.
