XHF UV Protected Adhesive Cable Tie Mounts – Outdoor Eaves and Patio String Light Installation with 8 Inch Zip Ties
XHF UV Protected Adhesive Cable Tie Mounts – Outdoor Eaves and Patio String Light Installation with 8 Inch Zip Ties
Couldn't load pickup availability
Why you'll love it
- No-drill, tool-free installation via 3M peel-and-stick adhesive saves time and avoids wall damage
- Dual mounting options (adhesive OR included screws) let users choose the right hold strength per surface
- UV-protected nylon holds up to sunlight and weather for reliable outdoor lighting displays
- Bulk 100–200 piece kits cover whole-home or vehicle projects in a single purchase
- Discreet black or white color options blend with walls, trim, and surfaces for a clean look
- PA66 nylon construction is tougher and more heat-resistant than generic plastic mounts
Perfect for
- Tidying TV and home theater cables along baseboards and behind entertainment centers
- Mounting Christmas lights and string lights on outdoor eaves and patio rails
- Routing computer, USB, and charging cables under desks and workstations
- Securing automotive wiring and aftermarket accessory cables inside vehicles
- Anchoring lightweight furniture to walls as a tip-prevention safety measure
100 Pack
High quality UV resistant nylon zip tie mounts can help you even outdoors. With a strong self-adhesive back, stable to help you fix the base.
100 Pack
We match you with 8 " Industrial grade nylon zip ties. Strong, flexible, with industrial grade strength, strong UV resistance, suitable for multiple projects.
100 Pack
We will prepare spare self tapping screws for you in the package, so that you can apply them on the rough surface or the surface where glue is difficult to stick. We want to make sure our products are available to you everywhere.
Suggestions on the use of cable tie mounts:
Clean Use Environment
Before using self-adhesive mounting, make sure that the surface to be pasted is free of dust or other impurities, and ensure the surface is smooth, so that the glue adhesion can play the greatest role.
Tear Off The Backing Paper Cleanly
Try to grasp a small corner of mounts, and avoid touching the gum with fingers after tearing, so as to ensure that the gum is clean.
Press and Wait Properly
When you stick the mounts on the surface of the object, press it with appropriate force for about 10 seconds. Hang or bind the object 12 hours after fixation. The purpose of this is to make the back glue fully integrate with the contact surface, increase the viscosity and prolong the service life.
Screws Where Necessary
When you encounter an object that is difficult to stick, you can use screws to fix the base 100%.
Product Information
High quality material：XHF Adhesive Zip Tie Mounts are manufactured from 3M Strong Adhesive and PA66 nylon. Wire tie downs without tools. Simply peel off the backing paper command strip place firmly on a clean, dust-free surface for best adhesion. Anti-Tip furniture anchors,suitable for cars, house and office, can be applied to various cables such as computer cables, TV cables, Christmas lights cable, USB cables and so on Note: Clean the surface of the dust before use,glue is best to be glued once and should not be disassembled repeatedly. After applying self-adhesive glue, it should be used 24 hours apart. 100pcs Cable tie mounting/100PCS 8" zip ties/100PCS Screws.
Technical Details Material Nylon Color Black Brand XHF Item Length 8 Inches Style Zip Maximum Diameter 8 Inches Number of Pieces 300 Manufacturer XHF UPC 738629963108 Part Number LJJ-22FR4-27 Item Weight 6.7 ounces Item model number LJJ-22FR4-27 Size 100 Piece Item Package Quantity 1 Batteries Included? No Batteries Required? No
Frequently Asked Questions
Can I leave these cable mounts outside year round on my eaves and patio?
Yes. XHF cable tie mounts are made from UV protected PA66 nylon that resists sun, rain, and temperature swings, making them suitable for permanent outdoor installations on eaves, fences, deck railings, and pergolas for string lights and seasonal displays.
Will the 3M adhesive actually stick to textured exterior surfaces like stucco or brick?
On smooth, clean surfaces like painted wood trim, metal gutters, vinyl siding, and glass, the 3M adhesive holds very well outdoors. For rougher textures like stucco, brick, or raw wood, we recommend using the included screws for a secure long-term hold.
Are these strong enough to hold heavy commercial grade string lights on a roofline?
XHF mounts paired with the included 8 inch zip ties are designed for standard residential string lights, C7, C9, and LED icicle lights. For very heavy commercial grade bulbs or long spans, add a screw-mounted mount every few feet to distribute the weight safely.
Can I use these for camping setups, like string lights on a camper awning?
Yes. The UV protected nylon and weather resistant adhesive work well on camper awning frames, RV rails, and tent poles. For portable setups where you will be moving lights daily, pair the mounts with zip ties only and skip the adhesive so you can rearrange freely.
Do the mounts turn yellow or brittle in the sun after one season?
No. The PA66 nylon used in XHF mounts is specifically UV protected to resist yellowing and embrittlement, which is the most common failure with generic plastic cable clips. Expect multiple seasons of clean, intact performance on outdoor lighting displays.
Is this a good option for permanent patio lights I want to leave up all year?
Yes, this is one of the most popular uses. The black color blends with most patio structures, the UV protection handles full sun exposure, and the dual adhesive plus screw option lets you choose the right hold strength for wood, metal, or vinyl patio covers.
Will rain or snow loosen the adhesive over time?
On properly cleaned and prepared surfaces, the 3M adhesive is rated for outdoor weather exposure and will not loosen from rain or snow. For areas with ice or heavy freeze-thaw cycles, use the screw-mounted option for added peace of mind.
Can I take down the lights after the holidays and reuse the mounts next year?
Yes. Cut the zip ties at the end of the season, store the lights, and leave the XHF mounts in place. New zip ties are inexpensive and let you rehang the same display next year without redoing the adhesive work.
Are cable ties or adhesive clips better for outdoor string lights?
Adhesive cable mounts like XHF give you a clean, spaced look along eaves and rails without wrapping wire around nails, which is faster to install and easier to adjust. For very long runs or heavy bulbs, combining adhesive mounts with occasional screw-mounted anchors gives the best of both approaches.
How do these compare to hot glue or nail-on clips for outdoor lighting?
Hot glue fails in heat and cold, and nail-on clips leave holes and can damage trim. XHF adhesive cable mounts are cleaner, removable, weather resistant, and include screws as a backup, making them a more versatile long-term solution for outdoor eaves and patio displays.
Will the adhesive hold in extreme heat, like a south facing wall in summer?
Yes. The PA66 nylon body is rated for higher heat resistance than standard plastic, and the 3M adhesive is designed to withstand elevated surface temperatures on sun exposed outdoor walls, fences, and patio covers.
How do I install XHF adhesive cable tie mounts on a smooth surface?
Clean the surface with isopropyl alcohol and let it dry completely. Peel the red backing film off the 3M adhesive pad, press the mount firmly onto the surface for 10 to 15 seconds, then wait 24 hours for the adhesive to fully cure before loading it with cables and zip ties.
Can I use the included screws instead of the adhesive?
Yes. Every XHF pack includes matching screws for optional mechanical fastening. Pre drill a small pilot hole if you are mounting into hard wood or masonry, then drive the screw through the center of the mount until it sits flush against the surface.
How much weight can each cable tie mount hold?
On a properly prepared smooth indoor surface, each 3/4 inch mount comfortably supports the weight of a small bundle of low voltage cables like HDMI, USB, lamp cords, and string light wiring. For heavier loads, long spans, or rough outdoor surfaces, use the screw mounted version and space the mounts closer together.
What size zip ties fit these mounts, and can I reuse my own?
The included zip ties are 8 inches long, which fits the square opening of the 3/4 inch mount. Any standard width zip tie up to about 0.2 inches wide will also fit, so you can use your own longer or colored ties if you prefer.
Do these work on glass, metal, plastic, and painted drywall?
Yes. The 3M adhesive is formulated to bond to smooth, non porous surfaces including glass, metal, sealed wood, plastic, and painted drywall. For porous surfaces like brick, concrete, stucco, or unfinished wood, use the included screws for a secure hold.
What is included in the XHF 100 piece and 200 piece kits?
Each kit includes the selected count of 3/4 inch XHF cable tie mount squares in your choice of black or white, a matching count of 8 inch zip ties, and a set of mounting screws for optional screw installation on rough or load bearing surfaces.
Is the adhesive safe to use on freshly painted walls?
Wait at least 7 to 14 days after painting for the paint to fully cure before applying the 3M adhesive. Applying adhesive to fresh paint can cause the paint to lift when the mount is removed later, which is the most common cause of wall damage with any adhesive cable mount.
Will these mounts hold up in a hot garage or attic?
Yes. The PA66 nylon body is rated for higher heat resistance than generic plastic cable clips, and the 3M adhesive maintains its bond across a wide temperature range, making XHF mounts suitable for garages, attics, and utility spaces with elevated temperatures.
What is the difference between adhesive cable mounts and cable raceways?
Adhesive cable mounts like XHF are small individual squares that hold a bundled cable run flat against a surface, which is discreet and flexible. Cable raceways are rigid plastic channels that fully enclose cables. Mounts are best for clean, low profile installs where you want the cable to follow the room, while raceways are best when you need a fully enclosed protective channel.
